Steel Dragon Tools® 1-1/2" Mag Drill and 2" Depth Small 7pc Carbide Cutter Kit

This package includes the Steel Dragon Tools® MD40 Magnetic Drill Press and the Steel Dragon Tools® 7-piece, 2-inch cut depth carbide-tipped annular cutter kit.

The MD40 Magnetic Drill Press will accept up to 2-inch annular cutters. This magnetic drill press will attach directly to the metal drilling surface with a powerful electromagnet and ensures the machine will not move during the drilling process. The magnet also allows the drill to operate upside down.

MD40 Features:

• Suitable for drilling on any metal surface
• Rack and pinion gear system for exact drilling depth

MD40 Specs:

• Motor: High-Speed Series, Induction, 1,100 W, 110 V, 60 Hz, 15 A
• Max Magnetic Force: 2,700 lbs. (12,000 N).
• Maximum Boring Diameter: 1-1/2 in. (40 mm)
• Maximum Boring Depth: 7-1/2 in.
• Tool Holder: 3/4-inch Weldon Shank
• Spindle Speed: 670 RPM

Annular Cutter Features:

• Steel Dragon Tools® annular cutters drill holes up to ten times faster
• Machine-finish hole with no reaming needed when using lubricant
• Make overlapping holes, slotting holes, and edge cuts
• Bit size is etched on each cutter
• Pilot pins help locate center of hole location and eject slug after drilling is complete
• During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug

Annular Cutter Specifications:

• Kit includes six (6) carbide-tipped annular cutters and two (2) pilot pin.
• Bit sizes included: 9/16 in., 11/16 in., 13/16in., 15/16 in, 1-1/16 in., 1-3/16 in.
• Cutting Depth: 2 in.
• 3/4 in. Weldon Shank
• Pilot Pin: 3/16 in. x 4 in. (4.74 mm x 103 mm)
• Pilot Pin: 1/4 in. x 4 in. (6.34 mm x 103 mm)
• Includes carrying case.