This package includes the Steel Dragon Tools® MD45 Magnetic Drill Press and the Steel Dragon Tools® 7-piece, 2-inch cut depth Tungsten Carbide-Tipped annular cutter kit.
This press will attach directly to the metal surface to drill holes quickly and safely. A secured magnetic drill press provides more leverage than a hand drill. The magnet also allows the drill to operate upside down.
MD45 Specs:
- Suitable for drilling on any metal surface.
- Adjustable base for precision drilling.
- Motor: 1200 W, 110 V, 50/60 Hz
- Max Magnetic Force: 2,700 lbs. (12,000 N). Thinner metal will result in less force.
- Maximum Boring Diameter: 1-3/4 in. (45 mm)
- Maximum Boring Depth: 7 in. (180 mm)
- Spindle Speed: 0-500 RPM
- Spindle Taper: MT2
- Includes MT2 to 3/4-inch Weldon Adapter spindle adapter.
- Includes MT2 to MT1 converter.
- One (1) year warranty against manufacturer defect.
Annular Cutter Features:
- Steel Dragon Tools® annular cutters drill holes up to ten times faster
- Machine-finish hole with no reaming needed when using lubricant.
- Make overlapping holes, slotting holes, and edge cuts.
- Bit size is etched on each cutter.
- Pilot pin helps locate center of hole location and eject slug after drilling is complete.
- During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.
Annular Cutter Specs:
- Kit includes six (6) carbide-tipped annular cutters and one (1) pilot pin.
- Bit sizes included: ½ in., 5/8 in., ¾ in., 7/8 in., 1 in., 1-1/8 in.
- Cutting Depth: 1-3/8 in.
- 3/4 in. Weldon Shank
- Pilot Pin: 1/4 in. x 3 in. (6.34 mm x 76 mm)
- Includes carrying case.
- package_weight:
- 2
- base_size:
- 8 in. x 4 in.
- chuck_adaptor:
- MT2 to 3/4" Weldon Shank & MT2 to MT1
- chuck_spindle:
- MT2
- color:
- Yellow
- drill_travel:
- 7.75"
- hertz:
- 50/60
- horsepower:
- 1.6 hp
- material:
- Metal
- max_capacity:
- 1.75 in. (45mm)
- max_magnetic_force:
- 2700 lbs (12000 N)
- overall_depth:
- 20
- overall_height:
- 11
- overall_width:
- 18
- power_cord_length:
- 7.5'
- power_source:
- corded-electric
- rpm:
- 100-500
- type:
- Electric Drills
- type_ebay:
- Magnetic Drill Press
- variable_speed:
- Yes
- voltage:
- 110
- annular_cutters:
- 7PC 1/2 in.-1 1/8 in. Cut Depth 1 3/8 in.
- pack_quantity:
- 1
