The Steel Dragon Tools® 7-piece carbide-tipped annular cutter kit includes six (6) annular bits and (2) pilot pins. These bits will quickly and safely cut holes in steel. The bits have a 2-inch cutting depth with a 3/4-inch Weldon shank. Also includes carrying case. Bit sizes included: ½ in., 5/8 in., ¾ in., 7/8 in., 1 in., 1-1/8 in.
Features:
- Steel Dragon Tools® annular cutters will drill large holes up to ten times faster than regular drills bits.
- Machine-finish hole with no reaming needed when using lubricant.
- Make overlapping holes, slotting holes, and edge cuts.
- Bit size is etched on each cutter.
- Pilot pins help locate center of hole location.
- Pilot pins help eject slug after drilling is complete.
- During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.
Specifications:
- Kit includes six (6) carbide-tipped annular cutters and (2) pilot pins.
- Bit sizes included: ½ in., 5/8 in., ¾ in., 7/8 in., 1 in., 1-1/8 in.
- Cutting Depth: 2 in.
- 3/4 in. Weldon Shank
- Pilot Pin: 1/4 in. x 4-11/64 in. (6.34 mm x 106 mm)
- Pilot Pin: 5/16 in. x 4-1/8 in. (7.98 mm x 105 mm)
- Includes carrying case.
- cutting_depth:
- 2 in.
- overall_depth:
- 10
- overall_height:
- 5
- overall_width:
- 10
- shank_diameter:
- ½ in.-1-1/8 in.
- type:
- Electric Drills
- pack_quantity:
- 1
