This package includes the Steels Dragon Tools MD25 Magnetic Drill Press and the Steel Dragon Tools 7-piece, small-diameter, 2-inch cut depth, high-speed steel annular cutter kit.
The Steel Dragon Tools MD25 Magnetic Drill Press has 3,372 lbs. of magnetic force to ensure the press will not move during operation. This press will attach directly to the metal surface to drill precision holes quickly and safely. The MD25 has a 1,350-watt motor and offers a maximum boring depth of 7 in. and maximum boring diameter of 1 in. The MD25 has an MT3 spindle taper and comes with an MT3 to MT2 spindle adapter.
A secured magnetic drill press provides more leverage than a hand drill, allowing the operator to cut even, consistent holes. The magnet also allows the drill to operate upside down.
A full line of 1-inch and 2-inch HSS annular cutters by Steel Dragon Tools are available.
MD25 Specifications:
- Motor: High-Speed, Induction, 1,350 W, 110 V, 60 Hz
- Max Magnetic Force: 3,372 lbs. (15,000 N). Thinner metal will result in less force.
- Maximum Boring Diameter: 1 in. (25 mm)
- Maximum Boring Depth: 7 in. (180 mm)
- Spindle Speed: 480 RPM
- Spindle Taper: MT3
- Includes MT3 to MT2 spindle adapter.
- Includes MT3 3/4-inch Weldon Shank Adapter with Morse Taper.
Annular Cutter Features:
- Steel Dragon Tools® annular cutters will drill large holes up to ten times faster than regular drills bits.
- Machine-finish hole with no reaming needed when using lubricant.
- Make overlapping holes, slotting holes, and edge cuts.
- Bit size is etched on each cutter.
- Pilot pin helps locate the center of hole location.
- Pilot pin helps eject slug after drilling is complete.
- During the drilling process, the pilot pin will retract into the cutter allowing lubrication to reduce heat gain in the slug.
Annular Cutter Specifications:
- Kit includes six (6) high-speed steel annular cutters and one (1) pilot pin.
- Bit sizes included: 7/16 in., 1/2 in., 9/16 in., 5/8 in., 11/16 in., and 3/4 in.
- Cutting Depth: 2 in.
- 3/4 in. Weldon Shank
- Pilot Pin: 3/16 in. x 4 in. (4.74 mm x 103 mm)
- Pilot Pin: 1/4 in. x 4 in. (6.34 mm x 103 mm)
- annular_cutters:
- 7PC 7/16 in.-3/4 in. Cut Depth 2 in.
- material:
- Metal
- overall_depth:
- 20
- overall_height:
- 11
- overall_width:
- 18
- power_source:
- corded-electric
- type:
- Electric Drills
- base_size:
- 8 in. x 4 in.
- chuck_adaptor:
- MT3 to MT2
- chuck_spindle:
- MT3
- color:
- Yellow
- cutting_depth:
- 7 in.
- drill_travel:
- 7.75"
- hertz:
- 60
- horsepower:
- 1.8 hp
- max_capacity:
- .1 in. (25mm)
- max_magnetic_force:
- 3372 lbs (15000 N)
- power_cord_length:
- 7.5'
- rpm:
- 480
- type_ebay:
- Magnetic Drill Press
- variable_speed:
- No
- voltage:
- 110
- wattage:
- 1350 watts
- pack_quantity:
- 1
